Installation Focus at TWC

Every installation begins with a survey. A TWC appointed surveyor will visit your home and take measurements for manufacture.

They will also check over all the structural openings and their surroundings and check that they’re in good condition.

TWC will protect your home from any mess.

The installation team will lay dust sheets and work with you to clear nearby areas of any valuables or equipment to prevent them from being damaged.

The team will also take great care to leave your home as they found it. They’ll clean up any mess and debris before they finish.

Your existing frames will be removed, as will any old sealand and debris. Where possible, the frames will be recycled.

With the area cleared and cleaned, your new frames will be put into position and firmly secured in place.

Then, your glazed units will be added before beading is added. If any trims are required, these will be measured, cut and fitted too.

Both frames and glass will be cleaned before a fine layer of selant is applied between the frame and the wall.

To finish, our install team will clean all the external surfaces again before placing a final layer of silicone to ensure a weatherproof finish.

Once that has been done, you can stand back and marvel at your new windows, doors or living space!